DR-120-12 LED Single Output Din Rail Switching Power Supplies Transformer DC 12V 10A Output SMPS

Product Detail

DR-120-24 LED Din Rail Switching Power Supply 24V 5A Output 

Model: DR-120-24

Input Power points: 110V~220V AC
Output Voltage: 24 DC

Output Rated Current: 0~5A

Output Rated Power: 120W 

2 Year warranty

Model		DR-120-12	DR-120-24	DR-120-48
output	DC voltage	12V	24V	48V
	Voltage tolerance	2%	1%	1%
	Rated current	8.3A	5A	2.5A
	Current range	0~8.3A	0~5A	0~2.5A
	Rated power	99.6W	120W	120W
	Ripple&noise	100mvp-p	120mvp-p	150mvp-p
	DCvoltage ADJ.range	-9%~+10%	10%	10%
input	Voltage range	90~264VAC,127~373VDC
	frequency	47~63HZ
	AC current	2.6A/110VAC,1.6A/220VAC
	efficiency	82%	84%	85%
	Inrush current	Cold start current  25A/110VAC,45A/220VAC
	Leakage current	< 1mA/240VAC
protection	Over load	Rated output power105%~135%    start over load protection
		protection type :rated current   limit ,auto-recovery after fault condition is removed
	over voltage	15.6~17.8V	30.6~33.2V	54.8~56.6V
		protection type:cutoff   output,recovery after restart power
environment	Working temp,humidity	-20~+60,20%~90%RH
	Storagetemp,humidity	-40~+85,10%~95%RH non-condensing
	Withstand vibration	10~500HZ,2G 10min/1cycle,period for   60 minutes,each axes
safety	Withstand voltage	I/P-O/P:3KVAC I/P-FG:1.5KVAC   O/P-FG:0.5KVAC
	Isolated resistance	I/P-O/P,I/P-FG,O/P-FG:100M   ohms/500VDC
Fitstandard	Safety standard	Fit UL1012
	EMC standard	EN55022,CLASSA
others	Dimension	65.5*125.2*100mm (L*W*H)
	Weight/packing	0.8kg/20pcs/17kg/0.046m?3;/1.64CUFT
note	1. All parameters NOT specially   mentioned are measured at 230VAC input, rated load and 25C of ambient   temperature. 2. Ripple & noise are measured   at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a   0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up   tolerance, line regulation and load regulation.